Fields in the Client LinkScan menu
Field
Description
Client Link Description
Displays the name of the client link you configured.
Action
Start the scan by clicking on
Scan
.
If the antennas are installed correctly on both sides and LOS is
free, the client finds available clients and displays them in the
following list.
If the partner client cannot be found, check the line of sight and
the antenna installation. Then carry out the
Scan
. The partner
should then be found.
AP MAC Address
Shows the MAC address of the remote client.
Network Name (SSID)
Displays the name of the remote client.
Channel
Shows the
Channel
used.
Mode
Shows the security mode (encryption and authentication) for the
wireless network.
Signal
Displays the signal strength of the detected client link in dBm.
Connected
Displays the status of the link on your client.
Action
You can change the status of the client link. The available ac-
tions are displayed in this field.
13.2 Administration
The
Wireless LAN
->
Administration
menu contains basic settings for running your gate-
way as an access point (AP).
13.2.1 Basic Settings
The
Wireless LAN
->
Administration
->
Basic Settings
menu includes the following fields:
Field in the Basic SettingsWLAN Administration menu
Field
Description
Region
Select the country in which the access point is to be run.
Possible values are all the countries configured on the gate-
way's wireless module.
Funkwerk Enterprise Communications GmbH
13 Wireless LAN
R1xxx/R3xxx/R4xxx
179
