LED
Status
Information
flashing
Data traffic over the SHDSL wire pair 4-5.
SHDSL-2/1
Top row
on
The wire pair 7-8 on the SHDSL line has suc-
cessfully synchronized with the DSLAM of the
SHDSL provider.
flashing
Data traffic over the SHDSL wire pair 7-8.
The LEDs on
bintec R3800
are arranged as follows:
Fig. 11: LEDs on
bintec R3800
In operation mode, the LEDs on
bintec R3800
display the following status information for
your device:
LED status display
LED
Status
Information
Power
on
The power supply is connected.
Status
Permanently on or
off
Error.
flashing
The device is active.
ETH 1 to 5
Top row
on
The device is connected to the Ethernet.
flashing
Data traffic via the Ethernet interface.
ETH 1 to 5
Bottom row
on
Data traffic with 100 mbps.
off
Data traffic with 10 mbps.
6 Technical data
Funkwerk Enterprise Communications GmbH
44
R1xxx/R3xxx/R4xxx
