Access data
Example value
Your values
Installation location of your device
)
Channel to be used for WLAN
'
Network name (SSID) for your
WLAN
without default
Visibility of the network name
&#/
Security setting
01!-2
4.3.2 Configuring a PC
In order to reach your device via the
Funkwerk Configuration Interface
and to be able to
carry out configuration, the PC used for the configuration has to satisfy some prerequisites.
• Make sure that the TCP/IP protocol is installed on the PC.
• Assign fixed IP address to your PC.
Checking the TCP/IP protocol
Proceed as follows to check whether you have installed the protocol:
(1) Click the Windows Start button and then
Settings
->
Control Panel
->
Network Con-
nections
(Windows XP) or
Control Panel
->
Network and Sharing Center
->
Change Adapter Settings
(Windows 7).
(2) Click on
LAN Connection
.
(3) Click on
Properties
in the status window.
(4) Look for the
Internet Protocol (TCP/IP)
entry in the list of network components.
Installing the TCP/IP protocol
If you cannot find the
Internet Protocol (TCP/IP)
entry, install the TCP/IP protocol as fol-
lows:
(1) First click
Properties
, then
Install
in the status window of the
LAN Connection
.
(2) Select the
Protocol
entry.
(3) Click
Add
.
(4) Select
Internet Protocol (TCP/IP)
and click on
OK
.
(5) Follow the on-screen instructions and restart your PC when you have finished.
Allocating PC IP address
4 Basic configuration
Funkwerk Enterprise Communications GmbH
16
R1xxx/R3xxx/R4xxx
