Field
Description
it possible to switch to a backup connection more quickly in the
event of line faults.
The function is enabled with
#/
.
The function is disabled by default.
MTU
Enter the maximum packet size (Maximum Transfer Unit, MTU)
in bytes that is allowed for connection between the partners.
With default value
1%
the value is specified by Link
Control Protocol when establishing the connection.
If you disable
1%
, you can enter a value.
Possible values are
to
.
The default value is
.
17.1.2 PPTP
In the
WAN
->
In Dialup
->
PPTP
menu, a list of all PPTP interfaces is displayed.
In this menu, you configure an Internet connection that uses the Point Tunnelling Protocol
(PPTP) to set up a connection, e.g. required in Austria.
17.1.2.1 New
Choose the
New
button to set up new PPTP interfaces.
The menu
WAN
->
In Dialup
->
PPTP
->
New
consists of the following fields:
Fields in the PPTPBasic Parameters menu
Field
Description
Description
Enter a name for uniquely identifying the internet connection.
The first character in this field must not be a number No special
characters or umlauts must be used.
PPTP Interface
Select the IP interface over which packets are to be transported
to the remote PPTP terminal.
If you want to use an external DSL modem, select the Ethernet
17 WAN
Funkwerk Enterprise Communications GmbH
244
R1xxx/R3xxx/R4xxx
