Field
Description
•
!
: The operation is triggered if one of the events does
not occur.
Reboot device after
Only if
Command Type
=
=#
Indicate a timespan in seconds that must pass before the
device is restarted.
The default value is
seconds.
MIB/SNMP Variable to
add/edit
Only if
Command Type
=
(<9-*(
Select the MIB table in which the MIB variable whose value is to
be modified is saved. First select the
System
, then the
MIB Ta-
ble
. Only MIB tables present in the relevant area are displayed.
Command Mode
Only if
Command Type
=
(<9-*(
Select how the MIB entry is to be modified.
Possible settings:
•
6$ ?&$ )
(default value): An existing entry
must be modified.
•
6 (< )
: A new entry must be created.
Index Variables
Only if
Command Type
=
(<9-*(
Where required, select MIB variables to be used as "index" in
order to uniquely identify a specific data set in
MIB Table
, e.g.
6 ?
. The combination of
Index Variable
and
Index
Value
yields unique identification of a specific table entry.
Use
Add
to create more
Index Variables
.
Trigger Status
Only if
Command Type
=
(<9-*(
Select the status the event must have in order to modify the MIB
variable as defined.
Possible values:
•
1%
(default value): The value of the MIB variable is mod-
ified if the initiator is active.
•
%
: The value of the MIB variable is modified if the
Funkwerk Enterprise Communications GmbH
21 Local Services
R1xxx/R3xxx/R4xxx
369
