Field
Description
The function is enabled by default.
Note the following exception: If
Virtual Router Priority
is
selected, the gateway with this priority certainly takes over the
master role, i.e. the setting in
Pre-empt mode (go back into
master state)
is not considered. You should therefore select a
Virtual Router Priority
lower than
if you wish to use
Pre-empt Mode.
Enable authentication
Enable or disable authentication.
The function is enabled with
#/
.
If the function is active, an input field is displayed. Enter the au-
thentication key here.
Note: Note that the authentication key must be the same for all
virtual routers in the group.
The function is disabled by default.
21.13.2 VR Synchronisation
The watchdog daemon is configured in the
Local Services
->
BRRP
->
VR Synchronisation
menu, i.e. you define how status changes are handled.
After opening the menu
Local Services
->
BRRP
->
VR Synchronisation
, a list of all syn-
chronisations is displayed. You can either synchronise virtual interfaces or interfaces. New
synchronisations can be added in the
New
menu.
For example, you can synchronise both virtual routers R1 and R2 over BRRP. To do this,
you must create two entries. For the first entry, as
Monitoring VR / Interface
R1 and as
Synchronisation VR / Interface
you must use R2. For the second entry, as
Monitoring
VR / Interface
R2 and as
Synchronisation VR / Interface
you must use R1.
21.13.2.1 New
Select the
New
button to create new synchronisations.
The
Local Services
->
BRRP
->
VR Synchronisation
->
New
menu consists of the following
fields:
Fields in the VR SynchronisationMonitoring VR / Interface menu
Funkwerk Enterprise Communications GmbH
21 Local Services
R1xxx/R3xxx/R4xxx
399
