Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual Download Page 37

Page: 37 / 407

3.2.8

Transporting the server

CAUTION

▶

Only transport the server in its original packaging or in packaging
that protects it from impacts and jolts.

In Japan and APAC, transporting the server in its original packaging
does not apply.

▶

Do not unpack the server until it is at its installation location.

▶

If you need to lift or transport the server, ask other people to help
you.

▶

Never lift or carry the server by the handles or the Quick Release
Levers (QRLs) on the front panel.

Important information

TX1320 M5

Upgrade and Maintenance Manual

Summary of Contents for PRIMERGY TX1320 M5
























































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1320 M5

Reviews:

Related manuals for PRIMERGY TX1320 M5

Brands by name

Popular brands

Fujitsu PRIMERGY TX1320 M5, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY TX1320 M5

Reviews:

Related manuals for PRIMERGY TX1320 M5

Brands by name

Popular brands