Fujitsu PRIMERGY TX1320 M5, Upgrade And Maintenance Manual, Page: 83 / 407

Important note
After replacing a defective memory module, please check if the error
counter has been reset automatically. If the memory slot is still marked
as failed, please reset the error counter manually using one of the
methods below.
Using ServerView Maintenance Tools (Windows only)
▶
Launch the ServerView Maintenance Tools:
Start
>
Apps
>
Fujitsu
>
Maintenance Tools
▶
Choose the
Memory
status tab.
▶
Select the memory module which shows the pre-failure status.
▶
Click on
Reset Status
.
The
Reset Status
button will only be available if the selected memory
module contains errors.
Using the command line interface (Linux/VMware only)
The memory error counter can be reset using the meclear utility which is part
of the ServerView agents for Linux.
meclear (Memory Module Error Counter Reset Utility) allows to reset
the error count collected for a memory module, for example after it has
been replaced.
For more Information, see the
meclear
manual pages.
▶
Log in as root.
▶
Enter the command below, followed by [ENTER]:
/usr/sbin/meclear
▶
Select the number of a memory module with a status other than
OK
or
Not
available
.
▶
Repeat the step above until all memory modules show the
OK
status.
Basic software procedures
TX1320 M5 Upgrade and Maintenance Manual 83