Fujitsu PRIMERGY TX1320 M5, Upgrade And Maintenance Manual

Page: 169 / 407

Preliminary steps
The HDD backplane is mounted on the HDD cage. It is not necessary to
remove the HDD cage before installing or removing the HDD backplane.
▶
"Shutting down the server" on page 45 .
▶
"Disconnecting the power cord" on page 46 .
▶
Remove all HDD/SSD modules from the server, see "Removing 2.5-inch
HDD/SSD modules" on page 154 .
▶
"Getting access to the component" on page 48 .
▶
Remove all HDD fan modules, see "Removing the HDD fan module (2.5-
inch HDD variant)" on page 67 .
▶
Remove all HDD backplanes, see "Removing a 2.5-inch HDD/PCIe
backplane" on page 160 .
Installing the PCIe backplane
▶
Install the PCIe backplane, see "Installing a 2.5-inch HDD/PCIe backplane"
on page 161 .
▶
Connect cables to the PCIe backplane, see "Connecting cables" on
page 163 .
For the cable plan, see "Appendix B" on page 375 .
For further informations about connecting SAS cables to the PRAID
controller, see
"Installing expansion cards" on page 195 .
Concluding steps
▶
If applicable, install the HDD backplane as backplane 2.
▶
Install all HDD fan modules, see "Installing the HDD fan module (2.5-inch
HDD variant)" on page 68 .
▶
"Installing 2.5-inch HDD/SSD modules" on page 152 .
▶
"Reassembling" on page 54 .
▶
"Connecting the power cord" on page 57 .
Hard disk drive (HDD) / solid state drive (SSD)
TX1320 M5 Upgrade and Maintenance Manual 169