Fujitsu F2 MC-8FX Family Hardware Manual Download

Page: 444 / 602

430

CHAPTER 23 10-BIT A/D CONVERTER

●

Checking the completion of conversion

The following two methods can be used to check whether conversion has been completed.

•

Checking with the interrupt request flag bit (ADC1.ADI)

•

Checking with the conversion flag bit (ADC1.ADMV)

●

Interrupted related register

Use the following interrupt level setting register to set the interrupt level.

●

Enabling, disabling, and clearing interrupts

Interrupt request enable flag and interrupt request flag

To enable interrupts, use the interrupt request enable bit (ADC2.ADIE).

To clear interrupt requests, use the interrupt request bit (ADC1.ADI).

(ADI)

Meaning

The value read is "0".

A/D conversion completed with no interrupt request

The value read is "1".

A/D conversion completed with interrupt request generated

(ADMV)

Setting

The value read is "0".

A/D conversion completed (suspended)

The value read is "1".

A/D conversion in progress

Interrupt level setting register

Interrupt vector

Interrupt level register (ILR4)

Address: 0007D

#18

Address: 0FFD6

Interrupt request enable bit (ADIE)

To disable interrupt requests

Set the bit to "0".

To enable interrupt requests

Set the bit to "1".

Interrupt request bit (ADI)

To clear an interrupt request

Write "0" to the bit or activate A/D.

Summary of Contents for F2 MC-8FX Family



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for F2 MC-8FX Family

Reviews:

Related manuals for F2 MC-8FX Family

Brands by name

Popular brands

Fujitsu F2 MC-8FX Family, Hardware Manual

Search results

Summary of Contents for F2 MC-8FX Family

Reviews:

Related manuals for F2 MC-8FX Family

Brands by name

Popular brands