Fujitsu Airstage AGUA12TLAV1, Design & Technical Manual

Page: 571 / 978

„ „
MAXIMUM CONNECTION OF NETWORK SEGMENT
„ z
Network segment : divided network by signal amplifier
„
● In the following case, signal amplifier is required.
(1) When the total length of the transmission line exceeds 1,640 ft. (500 m)
(2) When the number of total unit*1 exceed over 64 units.
„
● When a signal amplifier is installed, network is divided into two network segments.
Network segments mean divided block which has been connected with signal amplifier within
above condition.
In a network segment(NS), divided by a signal amplifier, have to keep the following limitation.
Segment inside Limitation
Transmission line 1,640 ft. (500 m) or less
Number of unit *1 (See the next page) 64 or less
Terminal resistor 1
1 2 3 4 5 6 25
1 2 3 4
1 2 3
1 2 3 4 5 62
4
62
62
64
64
64
63
63
63
34
26 27 28 29 30 31 32 33
Network
segment 1
Signal
Amplifier
Signal
Amplifier
Transmission line : within 1,640 ft.(500 m)
64units
64units
64units
Signal
Amplifier
Network
segment 2
Network
segment 3
Network
segment 4
„ z
Caution
VRF network system should keep both of number of unit and wiring length.
When system exceeds either number of unit or wiring length, system should be devided.
Different VRF series may not coexist within the same network.
- (06 - 07) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN