Fujitsu Airstage AGUA12TLAV1, Design & Technical Manual

Page: 30 / 978

1-4. ADAPTOR / CONVERTOR / MAINTENANCE TOOL
Network Convertor
Model : UTY-VGGXZ1
For three wire type remote
controller.
Split type systems can be
controlled from a central
controller via the convertor.
Network Convertor
Model : UTY-VTGX
For two wire type and three wire
type remote controller.
Split type systems can be
controlled from a central controller
via the convertor.
Modbus
®
Convertor for VRF
Model : UTY-VMGX
For connection between VRF
network system and a Modbus
®
open network.
Signal Amplifier
Model : UTY-VSGXZ1
If the total length of
transmission line exceeds
1,640 ft. (500 m), or the number
of units
exceeds 64, Signal Amplifier
will be necessary to use.
External Switch Controller
Models : UTY-TERX, UTY-TEKX
Air conditioner switching
can be controlled by
connecting other external
sensor switches.
Network Convertor for L
ON
W
ORKS
®
Model : UTY-VLGX
For connection between
VRF network system and a
L
ON
W
ORKS
® open network for
management of small to medium-
sized BMS.
Thermostat Convertor
Model: UTY-TTRX
For control Fujitsu General
products using a third-party
thermostat.
BACnet
®
Gateway (Software)
Model : UTY-ABGXZ1
The central control of
maximum 1600 indoor units
can be realized by connecting
the VRF network system to
the BACnet
®
, a global standard
of the open network.
BACnet
®
Gateway (Hardware)
Model : UTY-VBGX
For connection between VRF
network system to the BMS
system using BACnet
®
protocol.
Supports max.128 indoor units.
- (01-09) -
G
ENER
A
L
IN
FO
R
MA
TIO
N
G
ENER
A
L
IN
FO
R
MA
TIO
N