PART II OPERATION BEFORE USING THE MACHINE
■DISPLACEMENT, LOOSENESS, AND DISCONNECTION OF THE WIRE
●
If wires come off or terminals are loosened, it causes malfunction or poor connection.
Make sure terminals which are fixed by bolts are not loosened and coupler does not come off.
●
Make sure wires do not contact with parts below.
・
Sharp corner such as metal sheet, head of bolt and nut.
・
Moving parts such as belt, pulley, speed change rod.
・
Heating parts such as muffler.
●
When malfunction is found in inspection, ask your dealer for inspection
and service.
■ DAMAGE OF PARTS AND LOOSE OF BOLT AND NUT
●
Check if there is damage of parts of the machine and if bolts and nuts are loosened.
●
When malfunction is found in
inspection, ask your dealer for
inspection and service.
02-8619-14
■FREEZE OF PARTS
●
Carry out inspection after the engine and every part has stopped its operation
completely.
●
Check if there is snow clogging or freeze in auger, blower, chute, crawler, etc.
●
When there is snow clogging or freeze, remove it.
亀裂
緩み
Damage
Crack
DANGER
IMPORTANT
IMPORTANT
Loose
Bad move
IMPORTANT
- 29 -
