PART II OPERATION HOW TO REMOVE SNOW
(1)
Set the change lever at "N.Neutral".
(2)
Refer to "Start the engine" (p.33-34) and start the engine.
●
When starting the engine indoors, open the windows for sufficient ventilation. If the place is
poorly ventilated, poisoning may occur due to exhaust gas, which is very dangerous.
●
Set the travel clutch lever at "Off" and the change lever at "N.Neutral" before starting
the engine.
●
Check if the covers are attached correctly before starting the engine.
●
When starting the engine, give a signal aloud to surrounding people.
(3)
After warming up, adjust the engine revolution by the throttle lever.
(4)
Operate the chute control lever and decide on
the snow throwing direction and distance.
SD241-02-08
(5)
Operate the auger housing control lever and
decide on height and angle of the auger housing.
●
Control the auger housing during
work according to quality and
amount of snow and condition of
the surface of road.
SD241-02-07
(6)
Move the change lever to "Neutral point" of
"Low speed" side from "N.Neutral".
SF2-02-29
Right
Chute
control lever
Down
Up
Left
Right
Down
Up (Far)
Right
Left
Left
Down (Near)
Up
Left
Right
Up
Down
Auger housing
control lever
Front
Back
Low
High
Ｎ.Neutral
Neutral point
Neutral
Travel
Work
WARNING
WARNING
CAUTION
CAUTION
SUPPLEMENT
- 39 -
