PART II OPERATION HOW TO REMOVE SNOW
(7)
Hold the travel clutch lever slowly and
set it at "On".
SD241-02-05
(8)
Hold the work clutch lever slowly and set
it at "On" to rotate the auger and blower.
●
If the travel clutch lever is not set
at "On", even if the work clutch
lever is set at "On", it is not fixed
at "On" position. If the travel clutch
lever is set at "Off" , the work
clutch lever also becomes "Off".
02-8641-17
(9)
Set the throttle lever at the highest position of
" =High speed" and open the engine to full power.
●
If work with the throttle lever at " =Low speed", full performance
of the machine cannot be demonstrated.
(10)
Slowly move the change lever forward and set
the travel speed for work. When the machine
starts traveling, snow removal work starts.
●
Relations between fallen snow (quality) and
travel speed are followings. Bear reasonable
work in mind.
Much snow → Travel slowly.
Less snow → Travel a little fast.
SF2-02-31
●
Pay attention to the engine sound and exhaust fumes when setting the travel speed
for work so that the engine is not overloaded. If the engine is overloaded, it can
also cause snow clogging.
●
The load changes according to amount, quality, and moisture of snow. Set the travel
speed appropriately for the conditions.
Neutral point
IMPORTANT
Work clutch lever
Travel clutch
lever
Travel
Work
Front
Back
Low
Neutral
High
IMPORTANT
Auger
SUPPLEMENT
- 40 -
