PART III INSPECTION AND SERVICE TROUBLE SHOOTING
2．TROUBLE SHOOTING
For ☆, refer to "Engine manual".
Set the blower brake release lever at "Lock".
→P.23, 24, 31
terminals securely.
→P.53-54
Remove contamination and clean the air cleaner.
→☆, P.26, 50
→☆, P.26, 50
→P.21, 35
PROBLEMS
CAUSE
SERVICE
T
h
e
st
ar
te
r
mot
or
do
e
s
n
ot
st
ar
t.
Starting procedure is incorrect.
Follow the correct procedure.
→P.33-34
Travel clutch lever is at "On".
Set the travel clutch lever at "Off".
→P.24, 30
Chute cover is open.
Be sure to close the chute cover securely.
→P.24, 31
Blower brake release lever is at "Release".
Fuse has blown.
Contact your dealer.
Recharge or replace the battery. Or connect and fix the
Wire is disconnected.
Contact your dealer.
There is no fuel in the machine.
Replenish the fuel.
→P.27
→☆
The machine is doing unreasonable snow
removal work.
Unsuitable fuel is used.
Replenish oil to the prescribed amount.
→P.41-42
Decrease the travel speed for work and raise the auger
housing to decrease load to the engine.
Change lever returns.
Contact your dealer.
The machine does
not stop although the
travel clutch is at
"Off".
Travel blet is dragged.
Contact your dealer.
Counter belt is loosened.
Contact your dealer.
Travel belt is loosened.
Amount of HST oil is insufficient.
The augers and
blower do not rotate
although the work
clutch lever is at
"On".
Operation procedure is incorrect.
Battery discharged or battery terminal is not
connected well.
The machine does
not travel although
the travel clutch
lever is at "On".
Change lever is at "N.Neutral" or "Neutral
point" .
Follow the correct procedure.
→P.38-40
Blower belt is loosened.
Contact your dealer.
The machine stops
traveling halfway.
Set the lever at " " or " ", and then, set it to
"Forward" or "Backward".
T
h
e
e
n
gi
n
e
do
e
s
n
ot
st
ar
t.
Air cleaner is clogged.
Amount of engine oil is insufficient.
The engine is not
powerful.
Use proper fuel.
→☆, P.27, 49
Ignition plug is dirty or the gap between
electrodes is not adequate.
Clean the ignition plug. And adjust the gap of electrodes.
- 57 -
