Fuji Xerox DocuPrint P255 dw User Manual Download Page 216

Page: 216 / 252

216

Troubleshooting

The Top Margin Is Incorrect

NOTE:

•

If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Protrudent/Bumpy Paper

NOTE:

•

If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Problem

Action

The top margin is incorrect.

Ensure that the margins are set correctly on the application being
used.

Problem

Action

Printed surface got
protrudent/bumpy.

Clean up the fusing unit.

Load one sheet of paper in the paper tray, and then print a solid
image all over paper.

Load the printed sheet with the print surface facing down, and then
print a blank sheet of paper.

Summary of Contents for DocuPrint P255 dw





























































































































































































































































Search results

Summary of Contents for DocuPrint P255 dw

Reviews:

Related manuals for DocuPrint P255 dw

Brands by name

Popular brands

Fuji Xerox DocuPrint P255 dw, User Manual

Search results

Summary of Contents for DocuPrint P255 dw

Reviews:

Related manuals for DocuPrint P255 dw

Brands by name

Popular brands