Fuji Xerox DocuPrint M255 df User Manual Download Page 380

Page: 380 / 423

380

Troubleshooting

016-767

Press the button to clear the message. Check if the recipient address is correct, and
try scanning again.

016-791

Insert the USB memory device and press the button to clear the message.

016-795

Press the button to clear the message. Check if the format of a file stored in USB
memory device is supported, or the file is not broken.

016-797
016-920

Press the button to clear the message. Check the wireless settings for the access
point and the printer.

016-930

Remove the device from the front USB port and press the button to clear the mes-
sage.

016-931

016-981

Press the

button to cancel the current job. Try copying fewer documents.

016-985

Attached file size is larger than you defined. Press the button to clear the message.
Try the following:

•

Enlarge

Max E-Mail Size

•

Lower the resolution setting.

•

Change the file format of the scanned image.

017-970

Memory is likely to be full. Press the button to clear the message. Try the following:

•

Delete the data stored in the memory.

•

Lower the resolution setting.

•

Reduce the number of pages.

017-980

Press the button to clear the message. Retry when the printer does not process any
job.

017-981
017-988

Press the button to clear the message. Check if the interface cable is securely con-
nected or your computer does not have any problem.

018-338

Turn off the printer, and then on. If this does not solve the problem, contact our local
representative office or authorized dealer.

See also:

• "Online Services" on page 417

024-340
024-360
024-371
024-958

Load the specified paper and press the button to clear the message. Follow the on-
screen instruction if one appears.

024-963

024-969

Load the specified paper and press the button to clear the message.

026-720

Press the button to clear the message. Check if the USB memory device has
enough memory.

026-721

Press the button to clear the message. Check if the USB memory device is write-pro-
tected or gets any disk problem.

026-722
026-723

Press the button to clear the message. Check if the path and file name to save the
data is too long.

026-750

Press the button to clear the message. Check if the interface cable is securely con-
nected, or restart the application you use.

Error Code

What You Can Do

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M255 df, User Manual

Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands