Fuji Xerox DocuPrint M255 df User Manual Download Page 176

Page: 176 / 423

176

Printing Basics

Printer Settings

You can change the printer settings using either the operator panel or the Printer Setting Utility.

Changing the Printer Settings

• Using the Operator Panel

NOTE:

•

Factory defaults may vary for different regions.

•

Once one value is selected, it will be active until a new value is applied or the default value is restored.

•

Driver settings may have precedence over the changes previously made and you may have to change the
printer settings.

Press the

(

System

) button.

Select the desired menu, and then press the button.

Select the desired menu or menu item, and then press the

button.

•

If the selection is a menu, the menu opens and the list of menu items appears.

•

If the selection is a menu item, the default menu setting appears.

A value can be:

•

A phrase or word to describe a setting

•

A numerical value that can be changed

•

An On or Off setting

Repeat step

until you reach the desired value.

Press the

button to apply the selected value.

To continue changing the printer settings, use the

(

Back

) button to ascend the operator panel

menus to one of the top menus and follow steps

through

To quit changing the printer settings, keep pressing the

(

Back

) button until the LCD panel

shows

Select Function

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M255 df, User Manual

Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands