manualshive.com logo in svg

Fuji Xerox DocuPrint M255 df, User Manual

Share
Download
Fuji Xerox DocuPrint M255 df User Manual Download Page 298

298

Using the Operator Panel Menus and Keypad

Fax Settings

Use the 

Fax Settings

 menu to configure the basic fax settings. 

• Ans Select

Purpose:
To specify the default fax receiving mode.
Values:

• Auto Answer Fax

Purpose:
To specify a period of time for which the printer waits before entering the FAX Mode upon reception of 
an incoming call. The interval can be specified within the range of 0 to 255 seconds. The default is 0 
second.

• Auto Ans. TEL/FAX

Purpose:
To specify a period of time for which the printer waits before entering the FAX Mode when the external 
telephone receives an incoming call. The interval can be specified within the range of 0 to 255 
seconds. The default is 6 seconds.

• Auto Ans. Ans/FAX

Purpose:
To specify a period of time for which the printer waits before entering the FAX Mode when the 
answering machine receives an incoming call. The interval can be specified within the range of 0 to 
255 seconds. The default is 21 seconds.

TEL Mode

The printer does not automatically receive faxes. To receive an 
incoming fax, you need to pick up the handset of the connected 
external telephone, press the 2-digit code, and press the 

 (

Start

) 

button.

FAX Mode*

The printer automatically receives faxes.

TEL/FAX Mode

When the printer receives an incoming fax, the external telephone 
rings for the period of time specified for 

Auto Ans. TEL/FAX

, and 

then the printer automatically receives a fax. If an incoming call is not 
a fax, the printer beeps from the internal speaker indicating that the 
call is a telephone call.

Ans/FAX Mode

The printer shares the telephone line with an answering machine and 
monitors the line for a fax tone. It will pick up an incoming call if it 
hears a fax tone. This option is not available in regions where a serial 
phone system is employed.

DRPD Mode

To use this option, you need to subscribe the Distinctive Ring Pattern 
Detection (DRPD) service from your telephone company that assigns 
multiple telephone numbers to a single telephone line and 
distinguishes each line with a distinctive ring pattern. Once this 
service is activated, then you can configure your printer to monitor the 
line for the distinctive ring pattern.

*

Factory default menu setting

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands