Fuji Xerox DocuPrint M255 df User Manual Download Page 146

Page: 146 / 423

146

Printing Basics

Slide the paper width guides and the length guide to the maximum positions.

Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the
edges of the stack on a level surface.

Load the print media into the paper tray with the recommended print surface facing up.

NOTE:

•

Do not load paper media above the fill line on the paper width guides of the paper tray as it may cause
paper jams.

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M255 df, User Manual

Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands