manualshive.com logo in svg

Fuji Xerox DocuPrint M255 df, User Manual

Share
Download
Fuji Xerox DocuPrint M255 df User Manual Download Page 372

372

Troubleshooting

Copy Quality Problems

NOTE: 

•

If the problem continues even though you have taken suggested actions described above, contact our local 
representative office or authorized dealer.

Problem

Action

There are lines or streaks in 
copies made from the ADF.

There is debris on the ADF glass. When scanning, the paper from the 
ADF passes over the debris creating lines or streaks. 
Clean the ADF glass with a lint free cloth.

See also: 

• "Cleaning the Scanner" on page 395

There are spots in copies taken 
from the document glass.

There is debris on the document glass. When scanning, the debris 
creates a spot on the image.
Clean the document glass with a lint free cloth.

See also: 

• "Cleaning the Scanner" on page 395

The reverse side of the original is 
showing on the copy.

On the Copy menu, enable 

Auto Exposure

.

For information on turning 

Auto Exposure

 on and off, see 

"Auto 

Exposure" on page 198

.

Light colors are washed out or 
white on the copy.

On the Copy menu, disable 

Auto Exposure

.

For information on turning 

Auto Exposure

 on and off, see 

"Auto 

Exposure" on page 198

.

Image is too light or dark.

Use the 

Lighten/Darken

 option on the Copy menu.

For information on making the image lighter or darker, see 

"Lighten/Darken" on page 196

.

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands