manualshive.com logo in svg

Fuji Xerox DocuPrint M255 df, User Manual

Share
Download
Fuji Xerox DocuPrint M255 df User Manual Download Page 115

Printer Connection and Software Installation

115

„

Configuring Wireless Settings on the Operator Panel 
(DocuPrint M255 z only)

You can configure wireless settings on the operator panel.

IMPORTANT: 

•

The Wireless LAN feature is not available in all locations. Please check with your local Fuji Xerox 
representative for availability of wireless in your location.

•

If you are using a method other than WPS to configure your wireless setting, be sure to get the SSID and 
security information from a system administrator before starting the setup procedure.

•

Ensure that the Ethernet cable has been disconnected from the printer before you configure the wireless 
settings.

NOTE: 

•

Before you configure the wireless settings on the operator panel, you need to set up the wireless network 
settings on your computer. For details, see the Setup Guide.

•

For information on the specifications of the wireless LAN feature, see the 

"Configuring Wireless Network 

Settings (DocuPrint M255 z only)" on page 77

.

You can select a method to configure a wireless setting from the following:

*1 WPS-PIN is a method to authenticate and register devices required for wireless configuration, by entering PIN code in 
the printer and computer. This setting, performed through access point, is available only when the access points of your 
wireless router supports WPS.

*2 WPS-PBC is a method to authenticate and register devices required for wireless configuration, by pressing the button 
provided on the access point via wireless routers, and then performing WPS-PBC setting on the operator panel. This 
setting is available only when the access point supports WPS.

To configure wireless settings, refer to the method you selected.

• "Manual Wireless Setup" on page 116
• "Auto Setup With the Access Point" on page 118

Manual Wireless Setup for

Access Point (Infrastructure) Network
Computer-to-computer (Ad-hoc) Network

Automatic setup using

WPS-PIN

*1

WPS-PBC

*2

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands