Fuji Xerox DocuPrint M255 df User Manual Download Page 319

Page: 319 / 423

Using the Operator Panel Menus and Keypad

319

• Lighten/Darken

Purpose:
To specify the default copy density level.
Values:

• Sharpness

Purpose:
To specify the default sharpness level.
Values:

• Auto Exposure

Purpose:
To suppress the background of the original to enhance text on the copy.
Values:

• Gray Balance

Purpose:
To specify the default gray balance level within the range of

-2

. The factory default menu setting

Lighten2

Makes the copy lighter than the source document. Works well with
dark print.

Lighten1
Normal*

Works well with standard typewritten or printed documents.

Darken1

Makes the copy darker than the source document. Works well with
light print or faint pencil markings.

Darken2

Factory default menu setting

Sharpest

Makes the copy sharper than the source document.

Sharper
Normal*

Does not make the copy sharper or softer than the original.

Softer

Makes the copy softer than the source document.

Softest

Factory default menu setting

Off

Does not suppress the background.

On*

Suppresses the background of the original to enhance text on the
copy.

Factory default menu setting

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M255 df, User Manual

Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands