Franke FSM 97 P, User Manual

Page: 6 / 156

6
1.
SETTING THE TIME
You will need to set the time when you switch on the
appliance for the first time: Press until the
icon and the two digits for the hour start flashing on
the display�
Use or to set the hour and press to confirm�
The two digits for the minutes will start flashing� Use
or to set the minutes and press to confirm�
Please note: When the icon is flashing, for example
following lengthy power outages, you will need to reset the
time.
2.
SET THE POWER CONSUMPTION
The oven is programmed to work at a power of less
than 2�9 kW (“Lo”): To operate the oven at a power that
is compatible with a domestic power supply of greater
than 3 kW (“Hi”), you will need to change the settings�
To go to the change menu, turn the selection knob to
, then turn it back to �
Press and hold and for five seconds immediately
afterwards�
Use or to change the setting, then press and
hold for at least two seconds to confirm�
3.
HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: This is completely
normal�
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours�
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it�
Heat the oven to 250 ° C for about one hour,
preferably using the “Maxi Cooking” function� The
oven must be empty during this time�
Follow the instructions for setting the function
correctly�
Please note: It is advisable to air the room after using the
appliance for the first time.
FIRST TIME USE
1.
SELECT A FUNCTION
To select a function, turn the
selection knob
to the
symbol for the function you require: the display will
light up and an audible signal will sound�
2.
ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob
to set the temperature you require�
Please note: During cooking you can change the function
by turning the selection knob or adjust the temperature by
turning the
thermostat knob
.
The function will only start if the thermostat knob is on 0 °C.
You can set the cooking time, cooking end time (only if you
set a cooking time) and a timer.
AUTOMATIC
To start the automatic function you have selected
(“Bread” or “Dessert”), keep the
thermostat knob
at the
position for automatic functions (0)�
To finish cooking, turn the
selection knob
to position 0�
Please note: You can set the cooking end time and timer.
RISING
To start the “Rising” function, turn the
thermostat
knob
to the relevant symbol; if the oven is set to a
different temperature, the function will not start�
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
3.
PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a
flashing icon on the display indicate that the
preheating phase is active� When the set temperature
has been reached, the icon becomes fixed and a new
audible signal will sound to indicate that the food can
be placed inside and cooking can proceed�
DAILY USE