Fostex D2424LVmk2 Reference Manual Download Page 95

Page: 95 / 158

Model D2424LVmkII Reference Manual (Saving and Loading Song Data)

(1)

Press the [SETUP] key.

The recorder will enter the Setup mode.

(2)

Use the Jog dial to select “Load PGM ?,” and then
press the [EXECUTE/YES] key.

The message “

Load Device?

” and the type of digital

signal to be loaded (“

SPDIF

,” “

adat

,” or “

IDE2

”) will

flash on the display.

(3)

Rotate the Jog dial to select the type of digital
signal format ("SPDIF" or "adat") to be used for
the load operation.

Selecting “

adat

” will load data in the adat digital

signal format. Selecting “

SPDIF

” will load data in

the S/P DIF digital signal format.

(4)

Press the [EXECUTE/YES] key.

The digital signal selected is set and the program
number currently set on the load destination
current drive flashes. The size of the program
recording is also displayed.

(5)

Rotate the Jog dial to select a Program into which
to load data.

You can select any existing Program (from up to
99).
If you select a Program that already contains data
and execute the load operation, the existing data
will be overwritten by the new data.
If you do not wish to overwrite any data in any
current Program, use the Jog dial to select
“

New PGM

” to execute the load operation.

You can do this only when the number of existing
Programs is 99 or less and the hard disk has enough
free space to accommodate the new data.

If a program that is already recorded with some
sort of data is selected and loaded, only the song
data loaded will be valid. All the data of the
programs recorded on that same track up to then
will be erased.

(6)

Press the [EXECUTE/YES] key.

Now you can select tracks into which to load.

(7)

Select the desired track range using the Jog dial.

You can select 1, 9, 17, 25, 33, 41 and 49 of the
points that are flashing (left). Use the

Shuttle

dial

to move the flashing cursor to the left, then turn
the

Jog

dial to select 8, 16, 24, 32, 40, 48 and 56.

(8)

Press the [EXECUTE/YES] key. (“SURE?” flashes.)

EXT

" and "

DIGITAL

" will light up and "

SURE?

" will

flash in the display.

<Notes>

• If digital signal is being input correctly, a

“

DIGITAL”

and “

EXT

” indicator will light up on

the display.
If the “

DIGITAL

” and “

EXT

” indicator flashes,

check the connection, cabling, and the settings
of the recorder and the external device.

• The FS indication will flash and warn you if

the sampling frequency of the recorder and
DAT vary when loading with S/P DIF digital
signals. Be careful when setting the sampling
frequency for adat digital signals because there
will be no FS warning though there may be a
discrepancy.

(9)

Press the [EXECUTE/YES] key again.

“

Start Player !

” (Start playing the recorder) appears

on the display.

(10)

Play the corresponding external device (DAT or
adat).

The load operation starts when the recorder accepts
the incoming digital signal. The time required for
the load operation appears on the display and starts
counting down.

Two tracks are loaded at a time from a DAT machine
in the following order: Track 1 and 2, 3 and 4, etc.
from a DAT machine. Eight tracks are loaded each
time in the order of Track 1-8, 9-16, etc..

(11)

When the load operation is complete,
“COMPLETED!” flashes on the display.

(12)

Press the [STOP] button or the [EXIT/NO] key to
quit Setup mode.

The display will indicate the time base set for the
loaded Program.

Press the

[STOP]

button or

[EXIT/NO]

key to return

to one previous menu prior to the

[EXECUTE/YES]

key or if you want to cancel a procedure. Every
time you press these keys you will move back
one previous hierarchy, and eventually escape
from the SETUP mode and return to the time
base display. Note that all the song data loaded
will be invalid if you press the

[STOP]

button or

[EXIT/NO]

key while loading at

<Step-10>