120
Model D2424LVmkII Reference Manual (Changing the Initial Setting <SETUP mode>)
Flashing
Setting the Operating Clock
The “
Setting the Operating Clock
” menu is used to
setup the operating clock of the recorder.
If digital input is set to asynchronous mode of “
adat:
Async
” or “
SPDIF: Async
” in the previous “
D. in?
”
(Digital input setting), whether this recorder is to
operated by its internal clock or synchronized to
the word clock signal from the external digital
equipment should be selected when recording in
digital from external digital equipment (DAT, adat,
CD, MD, etc.). The initial setting is set to synchronize
to the internal clock.
The setup item “Video” is effective if an optional
Model 8346 TC/SYNC card is installed.
For details, refer to the “
APPENDIX
.”
(1)
While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
(2)
Turn the Jog dial to select “Clock Sel ?” (“?”
flashes), then press the [EXECUTE/YES] key.
A flashing “
?
” will extinguish by pressing the
[
EXECUTE/YES
] key and the operating clock
information that was lit will being flashing.
Initial setting, it will show “
Int.
”
• Initial setting:
[Int.]
• Option:
[Int.]
(Internal clock)
[Auto]
[Word]
[Video]
(Tis item will be
effective if the optional Model
8346 TC/SYNC card is
installed in this recorder.)
* This setting is shared by all Programs in the same
disk.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the recorder.
(3)
With the Jog dial, select the operating clock.
If “
Int.
” (initial setting) is selected, the recorder will
operate using the internal clock.
If “
Auto
” is selected, the recorder will sync to an
external digital signal.
If “
Word
” is selected, the recorder will sync to an
external word clock signal.
(4)
Press the [EXECUTE/YES] key.
The selected operating clock will register and “?”
in step-2 above, will flashes.
Refer to the chart of next page in regards to “Digital
input setting” and “Operating clock setting.”
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
Setting the MIDI device number
The “
Setting the MIDI device number
” menu enables
you to set the recorder device ID number required
to control the unit from a sequence software using
MMC (MIDI Machine Control) or FEX (Fostex System
Exclusive Message).
The transmit device ID links to this setting. You can
set the device ID from “
00
” to “
99
”.
However, if the device ID number of the message
the recorder receives is “
7F
”, the recorder will
recognizes it to perform the corresponding
operation, regardless of its device ID setting.
• Initial setting:
[00]
• Options:
[00] ~ [99]
* This setting is shared by all Programs in the same
disk.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the recorder.
(1)
While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
(2)
Turn the Jog dial to select “Device ID?” (“?”
flashes), then press the [EXECUTE/YES] key.
The current MIDI device ID number appears on the
display.
Pressing the [
EXECUTE/YES
] key turns off the
flashing “
?
” character, and the MIDI device ID
number flashes.
With the initial setting, “
00
” flashes as shown below.
(3)
Use the Jog dial to set the desired MIDI device ID
number.
Turning the Jog dial clockwise increments the value,
and turning it counter-clockwise decrements the
value.
(4)
Press the [EXECUTE/YES] key.
The MIDI device ID number is stored, and “
?
”
flashes.
Flashing
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
To cancel the operation, or to restore the setting
obtained prior to the
[EXECUTE/YES]
key press,
press the
[STOP]
button or the
[EXIT/NO]
key. Each
time you press one of these keys, the recorder
returns to the previous hierarchy level of the
menu, and finally exits SETUP mode and displays
the previous Time Base.
Summary of Contents for D2424LVmk2
Page 157: ......
