119
Model D2424LVmkII Reference Manual (Changing the Initial Settings <SETUP mode>)
Setting BAR/BEAT resolution mode
The “
Setting BAR/BEAT resolution mode
” menu enables
you to turn BAR/BEAT resolution mode on and off.
The initial setting is “
Off
.” When you turn this mode
on, the CLK (clock) digits will be always round off to
00 and be stored in the memory key while the
recorder is using the BAR/BEAT/CLK Time Base. That
is, beat resolution is used. Using this function allows
you to automatically store a beat-resolution value
of the CLIPBOARD IN/OUT points and other points
in real-time. (Press the STORE key, then the
corresponding memory key while playing the
recorder.) Therefore, it is very convenient when
you perform the Copy & Paste or Move & Paste
operation in beat-resolution.
For example, assume that you have stored the value
for 001bar 1 46 clk as the CLIPBOARD IN point,
and the value for 002bar 4 51 clk as the
CLIPBOARD OUT point.
These values will be used as they are if BAR/BEAT
resolution mode is turned off. However, the mode
is turned on, the following values will be stored
instead. The following example has a time signature
setting of 4/4.
001bar 1
46 clk -> 001bar 1
00 clk
(A clk value of 46 will be rounded off.)
002bar 4
51 clk -> 003bar 1
00 clk
(A clk value of 51 will be rounded up.)
• Initial setting:
[Off]
• Options:
[On]
or
[Off]
* This setting is shared by all Programs in the same
disk.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the recorder.
(3)
While the “adat” is flashing, turn the Jog dial.
“
SPDIF
” can be selected in addition to “
adat
”.
Select “
adat
” if the adat digital signal (8 tracks) is
to be output, and “
SPDIF
” if the S/P DIF digital signal
(2 tracks) is to be output.
(4)
After selecting the digital output signal, press the
[EXECUTE/YES] key.
The selected digital output signal will be registered
and the flashing “
?
” in Step-2 will return to flashing.
To cancel the operation, or to restore the setting
obtained prior to the
[EXECUTE/YES]
key press,
press the
[STOP]
button or the
[EXIT/NO]
key. Each
time you press one of these keys, the recorder
returns to the previous hierarchy level of the
menu, and finally exits SETUP mode and displays
the previous Time Base.
Flashing
(1)
While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
(2)
Turn the Jog dial to select “Resolution ?” (“?”
flashes), then press the [EXECUTE/YES] key.
The current BAR/BEAT resolution mode setting
appears on the display.
Pressing the [
EXECUTE/YES
] key turns off the
flashing “
?
” character, and the BAR/BEAT resolution
mode setting flashes. With the initial setting, “
Off
”
flashes as shown below.
(3)
Use the Jog dial to turn the mode “On” or “Off”.
When you turn the
Jog
dial clockwise and counter-
clockwise, “
On
” and “
Off
” flash alternately.
Selecting “
On
” turns BAR/BEAT resolution mode on,
and selecting “
Off
” turns BAR/BEAT resolution mode
off.
(4)
Press the [EXECUTE/YES] key.
The selected mode setting is stored, and “
?
” flashes.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
To cancel the operation, or to restore the setting
obtained prior to the
[EXECUTE/YES]
key press,
press the
[STOP]
button or the
[EXIT/NO]
key. Each
time you press one of these keys, the recorder
returns to the previous hierarchy level of the
menu, and finally exits SETUP mode and displays
the previous Time Base.
Summary of Contents for D2424LVmk2
Page 157: ......
