135
Model D2424LVmkII Reference Manual (MIDI Implementation Chart/MMC List)
Explanation on the Command/Mode Set
12 22 (<on/off>): loop on/off command
The command for setting the "loop mode on/off" (=ON/
OFF of AUTO RTN) of the D2424LVmkII.
Default figure of the loop operation mode is "12=stop" and
this cannot be changed.
12 28 (<post locate mode>): post locate command
The command for setting the "post locate mode" (=ON/
OFF of AUTO PLAY) of the D2424LVmkII.
It will stop after locating if "post locate mode=12."
It will enter play after locating if "post locate mode=15."
12 2D (<on/off>): auto rec command
The command for setting "auto rec mode on/off" (=ON/
OFF of AUTO PUNCH) of the D2424LVmkII.
Upon receiving this command, the D2424LVmkII will
immediately reply the operating condition by sending "32
2D (<edit message>)".
12 41 (<lock enable>): lock enable command
The command for setting "slave mode on/off" (setup menu)
of the D2424LVmkII.
12 42 (<lock mode>): lock mode command
The command for setup of the slave mode (setup menu)
when this equipment is set to "slave mode on."
12 45 (<count><mmc track>) : copy clip command
When this command is received, the D2424LVmkII will copy
(multiple number of tracks can be copied simultaneously)
the sound data, as data for copy paste, from the
pre-registered clipboard-in point to the clipboard-out point
in the track specified by <mmc track>.
With completion of copying the data into the clipboard,
the D2424LVmkII will immediately reply with "32 45 (<edit
message=01 (completed)>)".
If copy cannot be executed due to improper figures of the
pre-registered clipboard in/clipboard out points or
incorrect track section, the corresponding <edit message>
will be returned.
12 46 (<count=01><repeat count>): copy paste command
12 46 (<count><repeat count><mmc track>): copy paste com-
mand
When this command is received, the D2424LVmkII will paste
the sound data which has been copied into the clipboard,
on the same track from the pre-registered auto punch in
point as the starting point for the number of time specified
by <repeat count>.
However, if the sound data length in the clipboard is less
than 10ms, the specifying the <repeat count> will be
limited to "01." Also, by specifying <mmc track>, paste can
be executed on other tracks in mono (in one track units) or
stereo units (in combinations of tracks
1-2, 3-4, 5-6,
7-8.....).
Since time corresponding to length of the copy clipped
sound data is required to complete the copy paste
operation, the D2424LVmkII immediately replies with "32
46 (<edit message=02 (active)>)" after receiving the
command.
Successively upon completing the paste operation, "32 46
(<edit message=01(completed)>)" is transmitted.
If paste cannot be executed due to improper figures of the
pre-registered auto punch in point, insufficient disc
capacity, no sound data in the clipboard, etc., the
corresponding <edit message> will be replied.
12 47 (<count><mmc track>): erase command
When this command is received, the D2424LVmkII will erase
the data (writes in "0" data) in the section from the
pre-registered auto punch in point through auto punch
out point in the track specified by <mmc track>.
Since time corresponding to length of the erase section is
required to complete the erase operation, the D2424LVmkII
will immediately reply by "32 47 (<edit message=02 (ac-
tive) >)" after receiving the command.
After the completion of erase operation, "32 47 (<edit mes-
sage=01 (completed) >)" will be transmitted.
If erase cannot be executed due to improper figures of the
pre-registered auto punch in point/auto punch out point,
incorrect track section, etc., the corresponding <edit mes-
sage> will be replied.
12 49: clipboard play command
When this command is received, the D2424LVmkII will
playback once from the head of the sound data copied in
the clipboard by the copy clip and move clip commands.
Immediately after receiving the command, the
D2424LVmkII will reply with "32 49 (<edit message=02
(active)><count><mmc track>)." The sound data track
number is indicated by (mmc track>.
Upon completion of playback, "32 49 (<edit message=01
(completed) is sent and clipboard play is ended.
If there is no sound data in the clipboard, "32 49 (<edit
message=14 (void data)>)" will be sent and clipboard play
operation will be interrupted.
12 4A: undo command
Upon receiving this command, the D2424LVmkII will
revert to the condition prior to editing copy paste,erase,
move paste, cut, redo operation.
With completion of undo operation, D2424LVmkII will
reply with "32 4A (<edit message=01(completed)>)."
If the D2424LVmkII is not possible to undo, "32 4A (<edit
message=00 (no message)>)" will be replied.
12 4B: redo command
When this command is received, the D2424LVmkII will
return to the condition prior to undo operation.
With completion of redo operation, D2424LVmkII will
reply with "32 4B (<edit message=01(completed)>)."
If the D2424LVmkII is not possible to redo, "32 4B (<edit
message=00 (no message)>)" will be replied.
12 4D (<count><mmc track>): move clip command
When this command is received, the D2424LVmkII will copy
(multiple tracks can be copied simultaneously) the sound
data from the pre-registered clipboard in point to the
clipboard out point, as data for move paste operation.
With completion copying the data into the clipboard, the
D2424LVmkII will immediately reply with "32 4D (<edit
message=01 (completed)>)."
If copy cannot be executed by the reason of pre-registered
improper clipboard in/clipboard out point figures or
incorrect track section, etc., the corresponding <edit mes-
sage> will be replied.
12 4E (<count=01><repeat count>): move paste command
12 4E (<count><repeat count><mmc track>): move paste
command
When this command is received, the D2424LVmkII will paste
the sound data which have been move clipped in the
clipboard, for the number of times specified by <repeat
count> on the same track from the pre-registered auto
punch in point as the starting point.
At the same time, the move clipped original sound data
will be erased (data "0" is written in). However, when sound
Summary of Contents for D2424LVmk2
Page 157: ......
