137
Model D2424LVmkII Reference Manual (MIDI Implementation Chart/MMC List)
Upon completing the registeration, <edit message> will reply
with "01 (completed)," or with "10 (over value error)" if
registeration is attempted at a non-existing point or an
erroneous figure is used.
14 04 (<mmc time>): Preroll time set command
The command for setting the current program preroll time
at the figure indicated by <mmc time>.
14 06 (<frame rate>): Frame rate set command
The command for setting the current program frame rate
at the figure indicated by <frame rate>.
14 08 (<time base>): Time base set command
The command for setting the current program time base
of this equipment to that indicated by <time base>.
The Status Request Command
22 21: loop operation status request
The command inquiring the loop operation mode setup
status. The D2424LVmkII will reply with "32 21 (<loop
op.mode=12>)."
22 22: loop on/off status request
The command inquiring the loop on/off (=ON/OFF of AUTO
RETURN) setup status. The D2424LVmkII will reply with
"32 22 (<on/off>)."
22 28: post locate status request
The command inquiring the post locate mode (ON/OFF of
AUTO PLAY) setup status. The D2424LVmkII will reply
with "32 28 (<post locate mode>)".
22 2D: auto rec status request
The command inquiring the auto rec mode setup status
and this is replied by "32 2D (<edit message>)."
Reply from the D2424LVmkII against this status request
will be either one of the following:
<edit message> =05: Possible to undo rehearsal mode.
=06: Possible to undo take mode.
=72: off
22 41: lock status request
The command inquiring the slave on/off setup status and
the lock status. The D2424LVmkII will reply with "32 41
(<lock status>)."
22 42 : lock mode status request
The command for inquiring the lock mode setup status
and this is replied with "32 42 <lock mode>."
22 45: copy clip status request
The command inquiring the clipboard condition. If there
is a copy paste data in the clipboard, the D2424LVmkII will
reply with "32 45 (<edit message=01>)."
If data in the clipboard is for move paste or there is no
valid data in it, it will reply will "32 45 (<edit message=14
(void data)>)."
22 46: copy paste status request
The command inquiring execution status of copy paste
editing. When this command is received, the D2424LVmkII
will reply with either "32 46 (<edit message=02><mmc
time>)" or "32 46 (<edit message=00>)." <mmc time>
indicates unprocessed time until completion.
22 47: erase status request
The command inquiring execution status of erase.
When this command is received, the D2424LVmkII will
reply by either "32 47 (<edit message=02><mmc time>)"
or "32 47 (<edit message=00>)." <mmc time> indicates
unprocessed time until completion.
22 4D: move clip status request
The command inquiring the clipboard status. If there is a
move paste data on the clipboard, the D2424LVmkII will
reply with "32 4D (<edit message=01>)."
If data in the clipboard is for copy paste or there is no valid
data on it, "32 4D (<edit message=14 (void data)>)" will be
replied.
22 4E: move paste status request
The command inquiring the move paste execution status.
When this command is received, the D2424LVmkII will
reply with "32 4E (<edit message=02><mmc time>)" or
"32 4E (<edit message=00>)." <mmc time> indicates un
processed time until completion.
23 41: digital in channel status request
23 41: adat in channel status request
The command inquiring the digital in channel setup
status.
When this command is received, the D2424LVmkII will
reply with “33 41 (<channel> <channel>)” or “33 41
(<channel=7F> <count> <mmc track>).”
23 42: digital out channel status request
23 42: adat out channel status request
The inquiring the digital out channel setup status.
When this command is received, the D2424LVmkII will
reply with “33 42 (<channel><channel>)” or “33 42
(<channel=7F><channel=0>).
23 43: program status request
The command inquiring the presently operating program
number. When this command is received, the D2424LVmkII
will reply with "33 43 (<program>)."
23 44: click on/off status request
The command inquiring the metronome on/off status of
the D2424LVmkII. When this command is received, the
D2424LVmkII will reply with "33 44 (<on/off>)."
23 45: level status request
The command inquiring the present output level data of
the 1~24 tracks. In the D2424LVmkII as the level data is
updated about every 40msec., inquiry in 40msec. units is
effective. When this command is received, the D2424LVmkII
will reply with "33 45 (<count=10><level data>)."
23 46: resolution status request
The command for inquiring the resolution on/off setup
status. When this command is received, this equipment
replies with "33 46 <on/off>."
23 47: midi sync out status request
The command for inquiring on status of the midi sync out
setup condition. When this command is received, this
equipment replies with "33 47 <midi sync>."
23 48: MTC offset mode status request
The command for inquiring the MTC offset mode setup
status. When this command is received, this equipment
replies with "33 48 <MTC offset mode>."
Summary of Contents for D2424LVmk2
Page 157: ......
