Panel Saw
Kappa 30 / kappa 40
Maintenance
Fig. 118: Sliding table
On the opposite side, on the underside of the sliding
table:
2.
Loosen the five screws with a spanner (8 mm) and
remove the cover.
3.
Loosen the stop screw, washer and nut with an Allen
key (8 mm) and a spanner (17 mm) and remove.
4.
Loosen the stop screw, washer and nut with an Allen
key (10 mm) and a spanner (19 mm) and remove.
%
Screws
BL
Stop screw
&
Cover
BM
Nut
/
Sliding table
BN
Washer
(
Nut
BO
Nut
)
Washer
BP
Stop screw
Fig. 119: Base/Sliding table
On the side from which the sliding table should be
pushed from the base.:
5.
Pull the sliding table from the base.
!
Base
"
Sliding table
6.
Check the roller cage scraper
• Unhook the old roller cage from the cage plate.
• Clean the cage plate.
• Push the new rollers into the new roller cage.
• Hook the new roller cage into the cleaned cage
plate.
7.
Clean both the roller cage and cage plate thoroughly.
!
Scraper
#
Roller cage
"
Cage plate
$
Rollers
Note: The roller cage scraper will wear out. The complete roller cage has to be replaced should the func-
tion of the scraper no longer be guaranteed!
Fig. 120: Base/Sliding table
81
32 mm
/
*
)
BL
BM
BN
BO
%
&
BP
!
"
!
!
"
#
$
Summary of Contents for kappa 30
Page 93: ......
