Panel Saw
Kappa 30 / kappa 40
Making adjustments and preparations
Control panel - Option 2
The cutting height and the cutting angle are set using the
keypad.
Read individual operation instructions „Positioning con-
trol Digi-Drive“.
The cutting height and the cutting angle are displayed on
the display.
!
Display - Cutting height
"
Display - Adjusting the cutting angle
Fig. 56: Control panel - Option 2
8.10.2 Setting the height/angle of cut
!
Switch - Scoring unit height adjustment
"
Display - Circular saw height specification
#
Switch - Circular saw angle adjustment
$
Display - Circular saw angle specification
Fig. 55: Control panel - Option 1
Control panel - Option 1
The cutting height is set with the height adjustment
switch.
• To the left: lower
• To the right: higher
The cutting height is displayed on the display.
The cutting angle is set with the angle adjustment switch.
• To the left: towards 45°
• To the right: towards 0°
The cutting angle is displayed on the display.
49
!
"
#
"
$
!
Summary of Contents for kappa 30
Page 93: ......
