Panel Saw
Kappa 30 / kappa 40
6 Transport, packaging and storage
6.1 Safety instructions
Warning! Danger – electric current: There is a risk of injury due to falling parts while transporting, loading
or unloading the machine.
Attention! Risk of material damage: The machine can be damaged or destroyed if it is subjected to im-
proper handling during transport.
For this reason the following safety instructions must be
observed:
• Never lift loads over a person.
• Always move the machine with utmost care and pre-
caution.
• Only use suitable lifting accessories and hoisting
devices that have a sufficient load-carrying capacity.
• Never transport the machine by putting pressure on
any of its projecting elements (e.g. the planer tables).
• Consider the machine‘s centre of gravity when trans-
porting it (minimise the risk of it tipping over).
• Take measures to prevent the machine from slipping
sideways.
• Ropes, belts or other hoisting devices must be
equipped with safety hooks.
• Do not use torn or worn ropes.
• Do not use knotted ropes or belts.
• Ensure that ropes and belts do not lie against sharp
edges.
• Transport the machine as carefully as possible in
order to prevent damage.
• Avoid subjecting the machine to shocks.
When transporting the machine overseas, ensure
that the packaging is air-tight and that a desiccant is
added to protect the metal parts against corrosion.
6.2 Transport
Attention: Transport the machine only according to the enclosed transport and assembly instructions.
Do not lift the machine by the sliding table. Ropes, belts and chains may only be fastened to the base.
The machine is partly assembled when delivered on the
pallet.
The machine can be transported with a crane, forklift,
pallet jack or rolling carriage.
Transport, packaging and storage
29
Summary of Contents for kappa 30
Page 93: ......
