Panel Saw
Kappa 30 / kappa 40
Maintenance
10 Maintenance
10.1 Safety instructions
Warning! Risk of injury: Improper maintenance can cause serious injury or damage. For this reason these
works may only be carried out by authorised, trained personnel who are familiar with the operation of
the machine and in strict observance of all safety instructions.
• Before beginning any maintenance work on the ma-
chine, switch it off and secure it against accidentally be-
ing turned on again.
• Ensure that there is sufficient space for working around
the machine.
• Keep the work area orderly and clean. Components
and tools that are not fixed or have been left lying
around may be the cause of accidents!
• Following the maintenance work, re-install the guards
and check that they are functioning properly.
10.2 Maintenance schedule
Attention: Cleaning and care products are available as accessories (FORMAT-4-catalogue).
Warning! Danger – electric current: Work on electrical fittings may only be carried out by qualified person-
nel and in strict observance of the safety instructions.
Interval
Component
Task to accomplish
Machine
Remove dust and shavings.
Table surfaces
Remove dust and shavings.
Remove any resin residue.
Bearing tracks
Remove dust and shavings.
Remove any resin residue.
Outrigger arm rollers and pipe
Check for defects.
Weekly
Machine
Clean thoroughly.
Every 40 operating hours,
Height spindle and tilting spindle (circular saw) Lubricate.
At least once a month
Daily
76
76
Summary of Contents for kappa 30
Page 93: ......
