Panel Saws
kappa 30/kappa 40
Panel Saw
Kappa 30 / kappa 40
Setup and installation
1. With a standard stop:
Thread the scale track onto the machine table.
With a digital stop:
• Loosen the screw.
• Thread the scale track onto the machine table.
2.
Move the scale track forwards until it is flush with the
loading board.
3. With a standard stop:
Screw the scale track tightly, from the underside, with
a spanner (10 mm).
With a digital stop:
• Screw the scale track tightly, from the underside,
with a spanner (10 mm).
• Secure the screw again.
!
Scale track
"
Loading board
#
Screw
Fig. 31: Scale track Assembling
7.3.3 Scale track
The position and location of the bar is determined by the
saw table.
1.
The bar is secured with washers and nuts.
!
Bar
"
Washers
#
Nuts
Fig. 32: Assembling the bar
7.3.4 Bar
37
#
!
"
!
#
#
"
"
Summary of Contents for kappa 30
Page 93: ......
