Panel Saws
kappa 30/kappa 40
Panel Saw
Kappa 30 / kappa 40
Making adjustments and preparations
8.8.4 Removal
Fig. 50: Removal
It may be necessary to remove the parallel cutting fence
when machining large panels.
1.
Loosen the thumb screw.
2.
Loosen the clamping lever.
3.
Remove the parallel cutting fence from the bar back-
wards.
!
Setting the parallel cutting fence
"
Clamping lever
#
Thumb screw
$
Bar
8.8.2 Fine adjustment
1.
Switch off the machine.
2.
Loosen the clamping lever.
3.
Push the setscrew down and twist.
4.
Lock the clamping lever following the fine adjustment.
!
Setscrew
"
Clamping lever
Fig. 48: Fine adjustment
8.8.3 Modifying the guide
Fig. 49: Guide
1.
Loosen the clamping lever.
2.
Pull out the guide to the front.
3.
Place the guide flat onto the table or thread it through
again with the appropriate groove and with the nar-
row side.
4.
Lock the clamping lever.
!
Clamping lever
"
Guide
#
Groove
46
!
"
#
$
!
"
!
"
#
Summary of Contents for kappa 30
Page 93: ......
