Panel Saw
Kappa 30 / kappa 40
Making adjustments and preparations
8.17 Adjusting the width Standard
Attention: The scoring blade has to be 0.1 to 0.2 mm thicker than the saw blade!
Fig. 73: Scoring blade „Classic“
8.16 Adjusting the side
Twist the setscrew with a 10 mm socket spanner.
• Clockwise: towards the sliding table
• Anti-clockwise: away from the sliding table
Adjust the scoring blade so it is aligned with the saw
blade.
!
Clamping screw
"
Setscrew
#
Setscrew
Fig. 72: Adjusting the side
The scoring blade consists of two saw blades discs and
several spacer washers.
1.
Use as many spacer washers as necessary so as to
attain the required width.
2.
Set the scoring blade so that it is centered to the saw
blade.
3.
Check the setting by making a sample cut.
!
Saw blade discs
"
Spacer washers
57
!
!
"
!
"
#
Summary of Contents for kappa 30
Page 93: ......
