manualshive.com logo in svg

Format kappa 30, User Manual

Share
Download
Format kappa 30 User Manual Download Page 26

Panel Saw 

Kappa 30 / kappa 40

5.5.3.2 Circular saw guard

The saw guard may only be used with saw blades with a 

diameter of 250 to 315 mm.

Use the overhead saw guard with saw blades with a 

diameter measuring more than 315 mm.

The saw guard has to be installed and set correctly.

Clean the saw guard with the dust extractor.  

Ø = 50 mm.

!

Circular saw guard

Fig. 17: Circular saw guard

The overhead saw guard has to be installed and set cor-

rectly.

The dust has to be extracted from the overhead saw 

guard.  

Diameter = 80 mm

!

Overhead saw guard

5.5.3.1 Overhead saw guard

Fig. 16: Overhead saw guard

5.5.3.3 Automatic braking system

Your machine is equipped with an automatic braking 

unit. The brake is a maintenance free DC braking unit. 

All necessary adjustments are done by FELDER KG.

In case of problems or fault- function! 

Please contact the FELDER KG service department!

Setting up the machine

26

!

!

Summary of Contents for kappa 30

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands