Panel Saw
Kappa 30 / kappa 40
Making adjustments and preparations
8.18 Changing the scoring blade „Automatic“
Fig. 75: Dismantling the scoring blade
8.17.1 Adjusting the width „Automatic“
Required tools:
• Allen key 2,5 mm
• Screwdriver
The width of the „Automatic“ scoring blade is continu-
ously variable.
Adjusting the cutting width:
1.
Twist the setscrew with the Allen key in the „OPEN“
direction.
2.
Turn the adjusting screw with the screwdriver in the
direction of the „+“ or „-“ arrows, depending on the
variation of the desired cutting length.
The adjusting screw is equipped with a fine-pitch
thread. One turn corresponds to a cutting width ad-
justment of 0.5 mm.
3.
To clamp both parts, tighten the setscrew with the
Allen key in the „CLOSED“ direction.
!
Allen key
#
Adjusting screw
"
Setscrew
$
Screwdriver
Fig. 74: Scoring blade Adjusting the width
Attention! Only twist the adjusting screw if the clamping screw is loose!
Only adjust the width of the scoring blade so the saw-teeth of both scoring blades still overlap. Rec-
ommendation: Maximum cutting width of 3.6 mm.
Attention: If working without a scoring unit, install the protector tube to prevent resinous residue building up.
Required tools:
• Allen key 10 mm
• Special spanner
1.
Preparing to change tooling.
2.
Place the special spanner onto the mounting nut.
3.
Hold the scoring arbor in place with the socket span-
ner and loosen, anti-clockwise direction, the mount-
ing nut with the special spanner.
4.
Remove the mounting nut and tube protector.
5.
Adjust the scoring blade.
!
Tube protector
"
Lock
58
!
#
"
$
!
"
Summary of Contents for kappa 30
Page 93: ......
