Panel Saws
kappa 30/kappa 40
Panel Saw
Kappa 30 / kappa 40
Setup and installation
7.3.2 Overhead saw guard
Fig. 30: Overhead saw guard
1.
Screw the support arm onto the machine frame wall
with 3 screws.
2.
The horizontal position has been set by the manufac-
turer. Adjust the horizontal position with the adjust-
ment screw if required.
3.
Attach the overhead saw guard base to the support
arm with a screw.
4.
Attach the overhead saw guard with screws.
!
Overhead saw guard base
$
Overhead saw guard
"
Screw
%
Screw
#
Support arm
4.
Move the sliding table and base plate until they stop
against the stop plate (end position).
5.
Move the sliding table and the base backwards
against the stop screws.
6.
Tighten the nuts.
7.
Assemble the base.
!
Stop plate
Fig. 29: Assembling the sliding table
36
!
"
#
$
%
!
Summary of Contents for kappa 30
Page 93: ......
