FM Bakery ST Series, Instruction Manual

Page: 115 / 129

Ed.:21
– Ver.:01 – 01/01/2021
115
Mod. B4600Humid
If the default cycles do not meet your requirements, these cycles can be modified and memorised like a recipe. To do
so, go to the special cycle wanted (proofing, regeneration, cooling-down...) and proceed in the same way as in the
memorising process of a recipe.

Starting a special cooking cycles:
1. Press the icon to go to the “Special cycles” menu.
2. Press the special cycle wanted (regeneration, proofing or cooling-
down).
3. Next, press the icon to start the cycle.
20.8 Automatic cleaning
This device is prepared to control the oven automatic cleaning system. To do so, there are three different
cleaning programs:
-
SOFT Cleaning 45 minutes: Suitable for frequent use, for non-greasy and low-resistant dirt.
- MEDIUM Cleaning 1 hour and 10 min: Suitable for low-resistant dirt produced from the execution of several
consecutive cooking processes.
- HARD Cleaning 1 hour and 36 minutes: Suitable for greasy and highly resistant dirt.
If your oven has a trolley, keep in mind that it must be inserted in order to start a wash cycle.
Follow these steps to start a cleaning cycle:
1. Press the icon to go to the “Special cycles” menu.
2. Press the icon to go to the automatic cleaning menu.
3. Next, select the cleaning program wanted (SOFT, MEDIUM or HARD).
4. To finish, press the icon to start the cleaning cycle.
Access to the
“special cycles”
menu
1.
1.
2.
4.