6.
Save the VLAN settings by clicking the
Save
button. Alternatively,
clear the settings by clicking the
Reset
button.
Rules for packet management
Parameter
Default value
Default VLAN configuration
The factory-set VLAN parameters for the unit are as follows:
Management VLAN ID (MVID)
1
Native VLAN ID (NVID)
1
Native VLAN processing
Enabled
Port mode (all Ethernet ports)
Smart
Traffic classes
The system classifies incoming data packets according to the following definitions:
Signaling
Ethernet protocol type $8847 or $09xx
User
All other traffic
Packet tagged with MVID
Packet passed
Access port rules for incoming packets
(Case and Action)
Untagged packet from Fluidmesh device
Packet passed
Untagged packet, VID not configured
Packet passed
Untagged packet, VID configured
Packet tagged with specified VID
Tagged packet with valid VID
Packet dropped
Tagged packet with null (0) VID
Packet dropped
Access port rules for outgoing packets
(Case and Action)
Tagged packet with configured and
allowed VID
Packet passed
Packet from Fluidmesh device
Packet passed
Tagged packet, port VID not configured
Packet passed
Tagged packet with valid but disallowed
VID
Packet dropped
Tagged packet with null (0) VID
Packet dropped
Access port rules for incoming packets with unit in Smart Mode
(Case and
Action)
Untagged packet
If native VLAN = ON: Packet passed
(tagged with NVID)
If native VLAN = OFF: Packet dropped
Tagged packet (any VID, no checks)
Packet passed with original tag
Access port rules for outgoing packets with unit in Smart Mode
(Case and
Action)
Packets originating from Fluidmesh
devices (for example: RACER interface)
Packet implicitly tagged with MVID, next
rules apply
Signalling traffic
Packet implicitly tagged with MVID, next
rules apply
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 126 of 180