2.
Enable NTP synchronization by checking the
Enable NTP
check-
box.
3.
Enter the host name of a chosen primary NTP server in the
NTP
server hostname:
field.
IMPORTANT
The NTP server host names shown in
are for reference purposes only. Your
company policy may dictate that you use one or more
specific time servers.
4.
If needed, enter the host name of a chosen secondary NTP
server in the
Secondary NTP server (optional):
field.
5.
Select the time zone in which the unit is installed by clicking
the
Select Timezone:
drop-down menu and clicking the correct
time zone option.
6.
Save the NTP settings by clicking the
Save
button. Alternatively,
clear the settings by clicking the
Reset
button.
6.6.10. L2TP configuration
IMPORTANT
The L2TP configuration option is only available if
the Fluidmesh 4200 FIBER is set to
Mesh Point
mode or
Mesh End
mode. If the unit is set to
Bridge
mode, the
-l2tp
configuration
menu option will not be available.
The L2TP feature must be enabled using a software plug-in
(Fluidmesh part number
FM-L2TP
). Contact your Fluidmesh
Networks representative for details.
Layer 2 Tunneling Protocol (L2TP) functionality allows Fluidmesh radio
transceivers to support integration with virtual private networks (VPNs).
Fluidmesh hardware devices are shipped from the factory with L2TP
functionality disabled. To change the unit's L2TP settings, do the following
steps:
1.
Click the
-l2tp configuration
link under
ADVANCED SETTINGS
in the left-hand settings menu.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 123 of 180
