NOTE
The new password must be a minimum of eight
characters, and include at least one capital letter and
one number.
4.
To show the password as it is being typed, check the
Show
Password
check-box.
5.
Save the Viewmode Credentials settings by clicking the
Change
button. Alternatively, clear the settings by clicking the
Reset
button.
To change the View Mode settings, do the following steps:
1.
Log in to the unit's Configurator GUI with Administrator
credentials. See
“Accessing the Fluidmesh 4200 FIBER for
device configuration” (page 52)
2.
Click the
-view mode settings
link under
MANAGEMENT
SETTINGS
in the left-hand settings menu (
).
Figure 68. Configurator GUI (VIEW MODE SETTINGS dialog)
• The
VIEW MODE SETTINGS
dialog will be shown.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 135 of 180
