Fluidmesh 4200 FIBER Installation And Configuration Manual Download Page 153

Page: 153 / 180

Plug-in

Is the plug-

in package

removable

and re-

installable?

Function

Part number

PROFINET

Yes

Enables process field net
capability.

FM-PROFINET

QNET

Yes

Enables Neutrino Qnet
capability.

FM-QNET

FIPS

Yes

Enables Federal Information
Processing Standards
capability.

FM-FIPS

TITAN

Yes

Enables fast fail-over
capability on networks where
redundant (backup) units are
installed.

FM-TITAN

UNII2

Enables use of frequencies in
the Unlicensed National
Information Infrastructure (U-
NII) bands.

Supported bands are U-
NII-2A (5.250 to 5.350 GHz)
and U-NII-2C / U-NII-2E
(5.470 to 5.725 GHz).

FM-UNII2

The following tables describe which plug-ins are compatible with specified
Fluidmesh devices.

Table 7. Device plug-in compatibility (FM 1000 to FM 1300 OTTO)

Plugin

FM 1000

Gateway

FM 10000

Gateway

FM PONTE

FM 1200

VOLO

FM 1300

OTTO

Bandwidth

Available

Not available

Available

Bandwidth
upgrade

Available

Not available

Available

Fluidity-
Bandwidth
(Mobile)

Not available

Not
available

Not available

Fluidity-
Bandwidth
(Trackside)

Not available

Not
available

Not available

Fluidity

Firmware
embedded

Not available

Available

Not available

4.9 GHz band

Not available

Available

Not available

Licensed
frequencies

Not available

Available

Not available

Fluidmesh 4200 FIBER

Page 153 of 180

Summary of Contents for 4200 FIBER





















































































































































































Search results

Summary of Contents for 4200 FIBER

Reviews:

Related manuals for 4200 FIBER

Brands by name

Popular brands

Fluidmesh 4200 FIBER, Installation And Configuration Manual

Search results

Summary of Contents for 4200 FIBER

Reviews:

Related manuals for 4200 FIBER

Brands by name

Popular brands