Fluidmesh 4200 FIBER, Installation And Configuration Manual

Page: 75 / 180

The window shows a list of wireless links to other Fluidmesh units that
have been detected by the local unit, and the relative strength of each
wireless link in decibel-milliwatts (dBm).
To do an accurate alignment of a local antenna for a specific wireless link,
do the following steps:
1. Click the -antenna alignment and stats link under GENERAL
SETTINGS in the left-hand settings menu.
• The ANTENNA ALIGNMENT AND STATS window will be
shown ( Figure 27 (page 75) ).
Figure 27. Configurator GUI (Antenna alignment and
stats dialog)
2. More than one two-way wireless link may be shown in the
Detected Links table. Find the two-way link for which the local
antenna must be adjusted.
3. Click the Align button.
• The ANTENNA ALIGNMENT AND STATS tool will be
shown ( Figure 28 (page 76) ).
IMPORTANT
The Fluidmesh Transmission Power Control
(TPC) algorithm will be disabled during the
antenna alignment process. This eliminates
the possibility of false radio-transmission
power readings.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC Page 75 of 180