To let the system choose the optimal
Maximum link length
setting and
MAC layer timeouts automatically, check the
Automatic
check-box.
6.6.2. SFP settings
IMPORTANT
The Fluidmesh 4200 FIBER is shipped from the factory with no
fiber-optic transceiver installed.
For the unit to have fiber-optic capability, the SFP port must be
equipped with a separately-available XCO-type fiber-optic
transceiver.
XCO-standard transceiver modules and XCO-type duplex
fiber-optic connectors can easily be sourced as off-the-shelf
parts. If you experience difficulty in sourcing or ordering fiber-
optic parts or accessories, please contact your local Fluidmesh
Networks representative for assistance.
The
SFP/ETHERNET SETTINGS
window contains controls to change the
data exchange speeds of the unit's duplex fibre-optic link and RJ45
Ethernet port.
To change the data exchange speed of the fibre-optic link and/or Ethernet
link, do the following steps:
1.
Click the
-ethernet settings
link under
ADVANCED SETTINGS
in the left-hand settings menu.
• The
SFP/ETHERNET SETTINGS
dialog will be shown
).
Figure 48. Configurator GUI (SFP/ETHERNET
SETTINGS dialog)
2.
Choose the correct fiber-optic data exchange speed by clicking
the
SFP speed
drop-down and clicking the correct option.
3.
Choose the correct Ethernet data exchange speed by clicking the
Ethernet speed
drop-down and clicking the correct option.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 102 of 180
