If the
routed
Network Mode option was chosen, do the following
additional steps:
1. Specify the IP address and netmask of the subnet the radio unit is
part of by entering the correct addresses in the
WLAN IP address
and
WLAN netmask
fields.
2. To allow the radio unit to automatically assign any of a pre-defined
range of IP addresses to wireless clients that connect to the radio
unit, do the following steps:
a. Choose a continuous, unbroken range of IP addresses
(for example, 100.0.0.100 to 100.0.0.254).
b. Specify the first DHCP IP address in the chosen range by
entering the address in the
DHCP first IP address
entry
field.
c. Specify the last DHCP IP address in the chosen range by
entering the address in the
DHCP last IP address
entry
field.
IMPORTANT
A different DHCP IP address class must be
assigned to every 1200 VOLO, 3200-series
and 4200-series radio in the network. This
will help avoid IP conflicts between different
access points.
To configure the radio unit as a DHCP or static-protocol wireless station
(STA), do the following steps:
1. Configure the radio unit as a wireless station by clicking the
WLAN MODE
drop-down menu and selecting the
STA
option.
• The
FLUIDMESH 802.11 INTERFACE
dialog will show
additional options (below):
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 117 of 180
