2. To enable network address translation, check the
Network
Address Translation
check-box.
3. Choose the encryption protocol that will be used to encrypt
communication to and from connected clients by clicking the
WLAN Security
drop-down, and choosing a suitable security
option.
4. The radio unit will broadcast the SSID shown in the
WLAN SSID
field. If needed, change the SSID manually.
5. When maintenance personnel connect to the unit using the AP,
they will be prompted to enter a secret passphrase. Type a
chosen passphrase in the
WLAN Passphrase
entry field.
6. To show the WLAN passphrase in plain text as it is being entered,
check the
Show Passphrase
check-box.
7. Click the
Network Protocol
drop-down menu.
• If the wireless station must dynamically assign itself a
wireless LAN IP address and netmask, select the
DHCP
option.
• If a wireless LAN IP address and netmask must be
manually assigned to the wireless station, select the
STATIC
option. If the
STATIC
option is chosen, additional
options will become available. Refer to the steps below for
more information.
If the
STATIC
Network Protocol option was chosen, do the following
additional steps:
1. Specify the IP address and netmask of the subnet the radio unit is
part of by entering the correct addresses in the
WLAN IP address
and
WLAN Netmask
fields.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 118 of 180
