Figure 62. Configurator GUI (L2TP Configuration dialog)
• The
L2TP Configuration
2.
To enable L2TP functionality for the unit, check the
L2TP
check-
box.
• The L2TP configuration settings window will be shown.
3.
When the L2TP configuration has been set, save the settings by
clicking the
Save
button. Alternatively, clear the settings by
clicking the
Reset
button.
IMPORTANT
A detailed description of L2TP configuration methods is
beyond the scope of this manual. For detailed instructions on
how to set the L2TP configuration, refer to the
Fluidmesh
Networks L2TPv3 Configuration Manual
.
6.6.11. VLAN settings
VLAN configuration
The
VLAN SETTINGS
window contains controls to connect the Fluidmesh
4200 FIBER to one or more virtual local area networks (VLANs) that are
part of the local wireless network.
IMPORTANT
The VLAN feature must be enabled using a software plug-in
(Fluidmesh part number
FM-VLAN
). Contact your Fluidmesh
Networks representative for details.
The Fluidmesh 4200 FIBER features smart self-management of
integration with connected VLANs, with minimal configuration time and
avoidance of potential configuration errors. This is done by A) relying on
the data-processing configuration of a connected network switch, and B)
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 124 of 180